There is no doubt that a carbon monoxide detector – like Kidde AC Carbon Monoxide Detector Alarm – is a very important protecting device against carbon monoxide gas hazards in the home or office. Every time it detects the gas, it will alert you with an alarm sound or color change.
This gives you enough time to save people in your office or home from that toxic gas. Immediately, you should go to get fresh air.
However, please remember that not all carbon monoxide detectors are the same. They will perform differently. So, you have to look at its specifications before you are making any buying decision.
Actually, this article is devoted to you who have not installed the detectors yet in your offices or homes or are planning to replace the existing ones.
If some of you may have already installed several units in your office or home, then it had better for you to use this article as your future reference. And I can understand that it is not an easy decision to replace detectors that you are currently using.
But, one thing that we will never debate about is employee or family safety will never be exchangeable with anything else even with your hard-owned money.
Must-Have Features of Carbon Monoxide Detector
Okay, now we will see the must-have features of carbon monoxide detector. Those features are not accessories, but they are built in to increase their function as protecting devices.
1. Use Most Accurate Sensor Technology
This is the most important thing to be ensured when you are planning to buy a new detector. Electrochemical sensor is a good choice.
2. Two Alternatives Power Sources
Ideally, a carbon monoxide detector has two alternative power sources for its operation. An AC power and battery back up. This will ensure continuous detection and monitoring when a power outage occurs.
3. Easy to Install
There is no extra work required to install this device such as complex wiring. A plug-in type is preferable and a kid can install it easily.
4. Alarm Sound
Detector with a talking alarm is the best choice. But, ones that come with alarm sound or voice are more than enough. Make sure the alarm sounds dB. It must be enough noisy for you to hear even if while you are sleeping.
5. Easy to Read LED Display
This is very important for reading the actual carbon monoxide level. This gives you enough information about its severity.
6. Easy to Use Test/Reset Button
Test button is used for inspecting that the device is in good condition.
7. Low Battery and End-Life Warning
With this feature, you will be notified when the detector battery life and end-life of the unit itself.
Take care when you are planning to buy a carbon monoxide detector for your office or home. Use the above must-have features as your main reference. Never use price as your primary consideration since employee or family safety is not exchangeable.